首頁 > Product

SERVICE

  • Heavy-Duty High Speed Slitter/Rewinder

    YPSF-1000AC

    Features:
    This machine has been designed for surface center, double shaft winding systems. It can be used on non-variable thicknesses and slippery materials such as CPP, OPP, Polyester, Aluminum foil laninated paper, PVC, and laminates. It is particularly suited to non backed Aluminum foil. Features include a pneumatic/hydraulic pick-up system, and servomotor. It is computer controlled for convenient and accurate operation.
    Specifications:
    Slitting speed/ 0-300 meter per minute
    Base paper maximum width/ 1000(1300,1600,2000)mm
    Base paper maximum diameter / 800-1500mm
    Maximum coiling diameter / 600-800mm
    Cutting width / 50-1000(1300,1600,2000)mm
    Cutting width / 3”,6”
    Material / Paper,Laminated aluminum foil
    *The power supply is specified by the customer

  • Slitter/Rewinder

    YPS-1000

    Features:
    Designed for slitting and rewinding operations for various films, paper roll and printed materials such as PET, CPP, OPP, PE, PS, PVC and more. it can accommodate material thicknesses from 0.013 mm to 0.8 mm.
    Specifications:
    Mechanical speed / 0-150 meters per minute
    Raw material width / 300-1000(1300,1600)mm
    Maximum raw material diameter / 600mm
    Finished product width / 50-1000(1300,1600)mm
    Finished diameter / 420mm
    Paper tube inner diameter / 3”
    *The power supply is specified by the customer

  • Slitter/Rewinder

    YPS-1000

    Features:
    Designed for slitting and rewinding operations for various films, paper rolls and printed materials such as PET, CPP, OPP, PE, PVC and more. It can accommodate material thicknesses from 0.013mm to 0.8mm. The machine is driven by servomotor, and equipped with touch sensing screen. Automatic machine stop in case of film breakage. 50 sets of setting memory capacity. Automatic unwinding and rewinding tension control.
    Specifications:
    Base paper maximum width / 300-1000(1300,1600)mm
    Base paper maximum diameter / 1000mm(max.)
    Cutting width / 50-1000(1300,1600)mm
    Maximum coiling diameter / 600mm(max.)
    Paper tube inner diameter / 3”
    Mechanical speed / 0-300 m/min
    ower supply / 220V/380V/440V,3-Phase,50HZ/60HZ
    *The power supply is specified by the customer

  • Slitter/Rewinder

    YPSF-1000

    Features:
    Aluminum foil, Paper, Laminated Film (Toothpaste Multi-layer Film, Food Packing Film, Etc.) or Non-Laminated Films.
    Specifications:
    Slitting speed / 0-200mm
    Slitting speed / 1000,1300,1600mm(max.)
    Maximum diameter of base paper / 600mm(max.)
    Maximum coiling diameter / 500mm
    Cutting width / 50-1000(1300,1600)mm
    Paper tube inner diameter / 3”
    *The power supply is specified by the customer

  • Slitter/Rewinder

    YPSM-1000

    Features:
    Designed for slitting and rewinding operations for various films, paper rolls and printed materials such as PET, CPP, OPP, PE, PVC and more. Choice of rewinding clutch or motor drive. The rewinding can be equipped with an economically priced Bakelite or easily dismantled differential collars. It can accommodate material thicknesses from 0.013mm to 0.08mm. It is computer controlled for convenient and accurate operation.
    Specifications:
    Base paper maximum width / 300-1000(1300,1600)mm
    Maximum diameter of base paper / 600mm(max.)
    Coil width / 50-1000(1300,1600)mm
    Maximum coiling diameter / 420mm(max.)
    Paper tube inner diameter / 3”
    Slitting speed / 0-180 m/min
    Power supply / 220V/380V/440V,3-Phase,50HZ/60HZ
    *The power supply is specified by the customer

  • PVC Shrink Lable Sealing Machine

    YPB-P250

    Features:
    This machine has been especially designed to produce PVC shrink labels. The adaptability that comes with this machine is based on it's variable speed DC motor. This means a greater variety of materials can be processed. Keeping that in mind, we have still ensured to design a machine for easy operation and maintenance for you.
    Specifications:
    Raw material width / 30-520(600)mm
    Raw material diameter / 450mm max.
    Finished product width / 25-250(300)mm
    Finished product diameter / 700mm max.
    Mechanical speed / 0-300 meters per minute
    *The power supply is specified by the customer

  • Cutting Machine For PVC Shrink Lable

    YPBC-P301

    Features:
    JHBC-P301 handles efficient cutting jobs for PVC shrink labels. The unit is built with many fine features for superior cutting performance. Servo control is optional.
    Specifications:
    Raw material diameter / 600mm
    Slice length / 10-400mm
    Slice width / 30-300mm
    Inner diameter of paper tube / 3”,5”,10”
    Mechanical speed / 0-300 pcs/min
    *The power supply is specified by the customer

  • Re-Reeling &Doctor Machine

    YPR-P300

    Features:
    Rewinding and quality control for reels, especially for PVC colorful shrink labels. Special design makes unit easy to operate. Unwind unit can be adjusted freely by material unwind & rewind auto tension control. The synchronous flash light & vertical continuous perforating device maker is also available.
    Specifications:
    Finished product width / 25-250(300)mm
    Raw material diameter / 600mm(Max.)
    Finished diameter / 600mm(Max.)
    Paper Tube ID / 5”
    Mechanical speed / 0-300 m/min
    Voltage / 220V/380V/440V,3-Phase,50/60Hz
    *The power supply is specified by the customer

  • Wet Laminator

    YPWL-T1000

    Features:
    The JHWL-T1000 Wet Laminator is suitable for lamination operations on air permiable materials, films and aluminum foils (6 μ and higher), such as cigarette packet inner foil, wine boxes, gift boxes, and lunch boxes. 30-300g aluminum foil, drying, cooling and rewinding. Rewinding is managed through a pneumatic control system.
    Specifications:
    Raw material width / 400-1000(1200,1300)mm(max.)
    Base paper diameter /
    1500mm(max.)(Paper PET maximum weight paper, PET maximum load: 1200kg),
    450mm(maximum)(Aluminum foil,maximum weight鋁箔最大荷重:400kg)
    Coiling method / center winding(center unwinding)
    Rewinding diameter / 1600mm(maximum max)
    Mechanical speed / 0-150meters per minute
    *The power supply is specified by the customer

  • Dry Laminator Machine With Servomotor

    YPDL-1650C

    Features:
    This machine is suitable for various flexible packaging materials and multiple films, as well as all types of oil and water resistant films, freezer bags, boiling polycell bags and laminating bags. Materials that can be worked with include BOPP, CPP, PET, Nylon, PE, aluminum foil, metallic film and anti-static bags. The laminated finished product has excellent adhesive and transparency qualities. The machine features automatic roll change, auto splicing, servomotor control and PLC computer system.
    Specifications:
    Raw material width / 1000,1300,1600,2000 mm(Max)
    Finished width / 1000,1300,1600,2000 mm(Max)
    Raw material thickness / 0.5-8(Mil)
    Finished Thickness / 3-10(Mil)
    Raw material diameter / 800mm(Max)
    Coil diameter / 800mm(Max)
    Mechanical speed / 30m/min,Max 220 m/min(thin material),Max 180 m/min(thick material)
    Control / Digital software control(digital software control)
    Mechanical drive method / Servo/Inverter(Mechanical drive method)
    Mechanical walkway / Stainless steel(stainless steel)
    Voltage / 220V/380V/440V,3-phase,50/60Hz
    *The power supply is specified by the customer

  • Re-Reeling & Doctor Machine

    YPRB-1000

    Features:
    The rereeler has been especially designed to allow for post printing quality control inspections, and for rewinding to correct insufficient tension or alignment problems. The rereeler has a powder brake/clutch system to ensure complete tension control during operation. There are also a number of optional extras available to tailor your machine to your particular requirements, such as: a synchronized strobe light, LPC and EPC to aid in maintaining the correct tension and a amooth edge.
    Specifications:
    Raw material width / 300-1000mm
    Raw material diameter / 600mm(max.)
    Reel width / 1000mm(max.)
    Paper tube inner diameter / 3”
    Mechanical speed / 150M per minute
    *The power supply is specified by the customer

  • Center Sealing Cusset Machine

    YPB-K300

    Features:
    This machine has been especially designed to produce polycell. The adaptability that comes with this machine is based on it's variable speed DC motor. This means a greater variety of materials can be processed. Keeping that in mind, we have still ensured to design a machine for easy operation and maintenance for you.
    Specifications:
    Raw material width / 30-300mm
    Raw material diameter / 450mm max.
    Finished product width / 25-300mm
    Finished product diamete / 700mm max.
    Mechanical speed / 0-100 meters per minute
    *The power supply is specified by the customer

  • Three-step Seal Cutter

    YPBC-K303

    Features:
    The machine produces an air tight seal by using a three step sealing system, top and bottom sealing then water cooling. This system is particularly suited to processing poly bags which are often difficult to seal because of their thickness. The heavy duty design makes it one of the most functional and durable machines available.
    Specifications:
    Finished length / 50-400mm
    Finished product width / 30-300mm
    Mechanical speed / 30-150 bags per minute
    Raw material diameter / 700mm
    (Inside diameter 300mm,five jaw non-oore type.)
    *The power supply is specified by the customer
TOP